Popular searches:

The factory security

Date: 2019-05-07
Views: 16
Project Flow:
Project Description:
Adapt to the crowd:

Factory security


Background review:


    With the continuous development of the social economy, the prices of raw materials have soared, and the management of products and raw materials produced by factories has become more and more important. Relying on the internal factors of strengthening management, employee consciousness and security in the factory has not reached the needs of enterprise development. The management measures to prevent the loss of products and raw materials are imminent. Under the premise of not infringing on the personal rights of each employee, the use of security gates and metal detectors and other scientific and technological means for production management, effective combination of civil air defense and technical defense, thus becoming a true defender of corporate property.


    Background overview (coal enterprises): If coal mine workers carry out detonators, explosives and other items on their own, or if there are criminals who deliberately create accidents, this will be a dangerous thing. The impact of such incidents will be very bad. Coal mine management personnel and staff will be greatly harmed. To this end, coal mine management personnel must strengthen the supervision of coal mines and the configuration of safety equipment.


    Detection solution:


    Set the security door in the required place; 2. Configure the hand-held explosive detector for the security personnel, and install the remote detonator explosive detector and the timing detonating device detector.


    Installation purpose:


    It mainly checks the employees inside the factory when entering or leaving the workshop or factory to prevent internal employees from carrying the company's products or metal raw materials out of the factory, eliminating the loss of products and raw materials, and ensuring the safety of the company's property.


    Installation environment requirements:


    The security door is suitable for installation in the workshop, stairway or factory gates, etc. It is not suitable for open-air installation. It should be protected from wind and rain. If it is installed outside the factory gate, it should be covered by the corresponding canopy. The installation location of the door should be about 5cm above the ground, and there should be no large metal objects within 1m of the surrounding area to prevent unnecessary external metal interference when the security door is working, thus improving the inspection accuracy and accuracy of the security door. .


    Installation location selection (electronic products, wire and circuit, hardware industry, rare metals): First, the production workshop entrance and exit; Second, the workshop exports to the workers' locker; third, the factory gate entrance (requires rainproof facilities); 4. Other designated places.


    Inspection scope and actual operation of applicable products:


    The metal product detected by the security door is not less than the metal content of the coin size, and can accurately detect the location carried in the human body. According to the needs of customers, the sensitivity can be adjusted to achieve the best alarm detection effect.


    1. If the actual detection product has a large metal content, it can adjust the sensitivity to shield the metal buttons, zippers, belts, keys, coins, and even mobile phones in the human body clothing. The metal beyond the specified range will generate an audible and visual alarm. Such as small household electrical appliance manufacturers, large metal goods production enterprises and so on.


    2. If the metal products or raw materials tested are equivalent to the metal or metal carried on the human body clothes, the workers may be required to place the metal objects carried in the clothes box as much as possible, or place a long table next to the security door of the Kai Ya security. The item blue and the conveyor belt are convenient for the workers to take out the metal objects and then pass the security door when they leave the workshop, thus narrowing down the possible alarm areas. The security guards with the alarm can use the hand-held metal detectors for further inspection, which increases the speed of the personnel and improves the speed. Work efficiency and supervision. Such as IT companies (mobile phones and accessories, mp3, U disk, etc.), circuit board manufacturers, precision instrument parts companies, rare metal processing companies.


Technical advantages:
Precautions:
Metamorphosis:
Support hotline:
4006-971-972
The factory security
Basic Information

Factory security


Background review:


    With the continuous development of the social economy, the prices of raw materials have soared, and the management of products and raw materials produced by factories has become more and more important. Relying on the internal factors of strengthening management, employee consciousness and security in the factory has not reached the needs of enterprise development. The management measures to prevent the loss of products and raw materials are imminent. Under the premise of not infringing on the personal rights of each employee, the use of security gates and metal detectors and other scientific and technological means for production management, effective combination of civil air defense and technical defense, thus becoming a true defender of corporate property.


    Background overview (coal enterprises): If coal mine workers carry out detonators, explosives and other items on their own, or if there are criminals who deliberately create accidents, this will be a dangerous thing. The impact of such incidents will be very bad. Coal mine management personnel and staff will be greatly harmed. To this end, coal mine management personnel must strengthen the supervision of coal mines and the configuration of safety equipment.


    Detection solution:


    Set the security door in the required place; 2. Configure the hand-held explosive detector for the security personnel, and install the remote detonator explosive detector and the timing detonating device detector.


    Installation purpose:


    It mainly checks the employees inside the factory when entering or leaving the workshop or factory to prevent internal employees from carrying the company's products or metal raw materials out of the factory, eliminating the loss of products and raw materials, and ensuring the safety of the company's property.


    Installation environment requirements:


    The security door is suitable for installation in the workshop, stairway or factory gates, etc. It is not suitable for open-air installation. It should be protected from wind and rain. If it is installed outside the factory gate, it should be covered by the corresponding canopy. The installation location of the door should be about 5cm above the ground, and there should be no large metal objects within 1m of the surrounding area to prevent unnecessary external metal interference when the security door is working, thus improving the inspection accuracy and accuracy of the security door. .


    Installation location selection (electronic products, wire and circuit, hardware industry, rare metals): First, the production workshop entrance and exit; Second, the workshop exports to the workers' locker; third, the factory gate entrance (requires rainproof facilities); 4. Other designated places.


    Inspection scope and actual operation of applicable products:


    The metal product detected by the security door is not less than the metal content of the coin size, and can accurately detect the location carried in the human body. According to the needs of customers, the sensitivity can be adjusted to achieve the best alarm detection effect.


    1. If the actual detection product has a large metal content, it can adjust the sensitivity to shield the metal buttons, zippers, belts, keys, coins, and even mobile phones in the human body clothing. The metal beyond the specified range will generate an audible and visual alarm. Such as small household electrical appliance manufacturers, large metal goods production enterprises and so on.


    2. If the metal products or raw materials tested are equivalent to the metal or metal carried on the human body clothes, the workers may be required to place the metal objects carried in the clothes box as much as possible, or place a long table next to the security door of the Kai Ya security. The item blue and the conveyor belt are convenient for the workers to take out the metal objects and then pass the security door when they leave the workshop, thus narrowing down the possible alarm areas. The security guards with the alarm can use the hand-held metal detectors for further inspection, which increases the speed of the personnel and improves the speed. Work efficiency and supervision. Such as IT companies (mobile phones and accessories, mp3, U disk, etc.), circuit board manufacturers, precision instrument parts companies, rare metal processing companies.


in the previous:noneThe next article:none
Relevant solutions
Views: 148
Date: 2019 - 05 - 07
Large event security checkSummary of the background of large events:Entertainment venues such as disco bars are a good place to relax after work, but because the main consumer groups are young people, coupled with the possibility of excessive drinking, Judi’s physical contact is inevitable, and violent bloodshed often occurs. It poses a potential threat to the lives and property of other consumers and has a very negative impact on the operators. The Regulations on the Administration of Entertainment Places promulgated by the State Council Order No. 458 signed by Premier Wen Jiabao of the State Council of China was officially implemented on March 1, 2006. According to the regulations: entertainment discotheque bars and other entertainment venues will be equipped with security inspection equ...
Views: 16
Date: 2019 - 05 - 07
Factory securityBackground review:    With the continuous development of the social economy, the prices of raw materials have soared, and the management of products and raw materials produced by factories has become more and more important. Relying on the internal factors of strengthening management, employee consciousness and security in the factory has not reached the needs of enterprise development. The management measures to prevent the loss of products and raw materials are imminent. Under the premise of not infringing on the personal rights of each employee, the use of security gates and metal detectors and other scientific and technological means for production management, effective combination of civil air defense and technical defense, thus becoming a true defender of co...
Views: 17
Date: 2019 - 05 - 07
Station securityOverview of station and subway security inspection:     With the continuous occurrence of various terrorist attacks around the world, public security has received the attention of all countries.     China is rapidly developing the subway. By 2015, the operating mileage will increase from the current 1,000 kilometers to more than 4,000 kilometers.     The development of the subway has brought convenience to people. At the same time, there are hidden threats and risks. Strengthening the security measures of the subway is an important part of preventing terrorist attacks. It is also one of the links that the current technical means need to be upgraded.     The subway security inspection includes the detection of the h...
Views: 13
Date: 2019 - 05 - 07
Government agency securityGovernment agencies refer to the abbreviations of various departments at the provincial level as well as public security bureaus, procuratorates, courts, and prisons (detention centers).      Background review:      In public security, procuratorates, courts, government agencies, prisons, and other important places, detailed physical examinations are required for the entering personnel to prevent the entry of personnel carrying guns, daggers, controlled knives, detonators, explosives, etc.      Under the premise of not infringing on the personal rights of individuals, it is necessary to use the technology such as Qi Ya security door and metal detector for security inspection, and use scientific and technological means t...
 攀枝花矛盾安全防范技术有限公司©2018 - 2020
犀牛云提供云计算服务
Address: No.1Unit 2Building 2 No. 1469, Laihua Avenue, Renhe Town, Renhe District, Panzhihua City 
Tel:15808118684
传真:+86 0755-2788 8009
邮编:330520
Contact information
/ Contact us
Free consultation hotline
15808118684